HP EliteDesk 800 65W G2 Maintenance and Service Guide - Page 54
Reverse the removal procedure to install a new processor., processor's solder connections.
![]() |
View all HP EliteDesk 800 65W G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
7. Lift the processor (3) straight up and remove it. CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and handling them could cause irreparable damage. Once pins are damaged it may be necessary to replace the system board. The heat sink must be installed within 24 hours of installing the processor to prevent damage to the processor's solder connections. Reverse the removal procedure to install a new processor. NOTE: After installing a new processor onto the system board, update the system ROM to ensure that the latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at: http://h18000.www1.hp.com/support/files. 46 Chapter 4 Removal and replacement procedures - desktop mini (DM) chassis
![](/manual_guide/products/hewlettpackard-collaboration-pc-g2-maintenance-service-guide-55edf65/54.png)