HP EliteDesk 800 65W G2 Maintenance and Service Guide - Page 56
Expansion connector board
View all HP EliteDesk 800 65W G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Expansion connector board Description HDMI expansion connector board Serial port expansion connector board DisplayPort expansion connector board An expansion board can be installed near the back of the system board that provides an additional connector on the rear I/O panel. The board is secured with two screws and connects to the a connector on the system board. To remove the expansion connector board: 1. Prepare the computer for disassembly (Preparation for disassembly on page 20). 2. Remove the top cover (Top cover on page 21). 3. Remove the heat sink (Heat sink on page 43). 4. Remove the fan (Fan on page 37). 5. Remove the two Phillips screws that secure the board to the system board. 6. Lift to disengage the board from the system board connector, and then remove the expansion connector board from the computer. To install the expansion connector board, reverse the removal procedures. 48 Chapter 4 Removal and replacement procedures - desktop mini (DM) chassis