HP EliteDesk 800 65W G2 Maintenance and Service Guide - Page 35
Drive cage, the HDD cage 2.
![]() |
View all HP EliteDesk 800 65W G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Drive cage The drive cage is located next to the heat sink. The drive cage is secured with three Phillips screws. 1. Prepare the computer for disassembly (Preparation for disassembly on page 20). 2. Remove the top cover (Top cover on page 21). 3. Remove the hard drive (Hard drive on page 23). 4. Remove the three screws securing the HDD cage to the chassis (1). 5. Pull the hood sensor up and off the HDD cage (2). 6. Lift the HDD cage out of the chassis (3). To install the drive cage, reverse the removal procedure. Drive cage 27
![](/manual_guide/products/hewlettpackard-collaboration-pc-g2-maintenance-service-guide-55edf65/35.png)
Drive cage
The drive cage is located next to the heat sink. The drive cage is secured with three Phillips screws.
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
20
).
2.
Remove the top cover (
Top cover
on page
21
).
3.
Remove the hard drive (
Hard drive
on page
23
).
4.
Remove the three screws securing the HDD cage to the chassis (1).
5.
Pull the hood sensor up and
off
the HDD cage (2).
6.
Lift the HDD cage out of the chassis (3).
To install the drive cage, reverse the removal procedure.
Drive cage
27