HP Jetdirect 280m HP Jetdirect 280m 802.11b Wireless Internal Print Server LIO - Page 53
Note: For a, wireless print, server, If you use an, internal print
View all HP Jetdirect 280m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Network Basics Connect the printer cable (USB or parallel, as appropriate) between the printer and the print server. Connect the network cable to the print server. Switch on the printer's power. Plug in the print server's power cord. Push the Test button on the print server to print a configuration page on the printer; this tests the connection between the print server and the printer. (For detailed instructions, check your print server manual or setup poster.) Note: For a wireless print server the connection sequence is the same, except that there is no network cable to connect. q If you use an internal print server: Note that many printers come with the print server module file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/NETBASIC/FIP0010.HTM (2 of 4) [5/20/2003 3:45:29 PM]