HP Kayak XA 05xx HP Kayak XA Series 05xx, Upgrade & Configuration Guide - Page 26
When a New SCSI Hard, Disk Drive Is Installed, When an IDE Drive, Is Installed
![]() |
View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1 How to Install Accessories In Your Desktop PC Workstation Installing Mass Storage Devices Completing the Installation of a Hard Disk Drive When a New SCSI Hard 1 Switch on the computer. Disk Drive Is Installed 2 To enter the SCSI Configuration Utility press F6 when the message Press F6 to start Configuration Utility... is displayed during the PC Workstation's start-up routine. 3 Verify or modify the configuration of your new SCSI hard disk drive. For more information on configuring a SCSI hard disk drive, refer to the SCSI Administrator's Guide available on HP's Web site at http://www.hp.com/go/kayaksupport. 4 When configuration is complete, exit the SCSI Configuration Utility and re-boot the computer to save any changes. When an IDE Drive Is Installed NOTE 1 Switch on the computer. 2 To display the device in POST, press Esc while the PC Workstation re-starts. 3 If an error message appears, follow the instructions provided by the Error Message Utility. 4 To verify the configuration of your hard disk drive, press F2 to enter Setup when prompted. Once in Setup, select the Advanced menu, then the IDE Devices submenu. In the Primary Master item, check that the details for the device have been correctly detected by the Setup program. 5 Press F3 to save and exit Setup. Refer to the operating system documentation for information on formatting a drive. If an IDE drive is removed, switch on the computer. The system BIOS will detect that the device is missing. Press F4 to confirm that you want to remove the device. The system configuration will be updated automatically. 16 English
![](/manual_guide/products/hewlettpackard-kayak-xa-05xx-hp-kayak-xa-series-05xx-upgrade-configuration-guide-9b13e06/26.png)