HP Kayak XA 05xx HP Kayak XA Series 05xx, Upgrade & Configuration Guide - Page 41
Remove the fan connection to the system board.
View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2 How to Install Accessories In Your Minitower PC Workstation Moving the Power Supply Moving the Power Supply You can slide the power supply unit out of the computer to improve access to the system board and the cables at the rear of the disk drives. 1 Disconnect the computer's power cord and any LAN cable. 2 Remove the computer's cover (see page 27). 3 Remove the fan connection to the system board. Fan connection to system board HP UltraFlow Airflow Guide Retaining button 4 Press the retaining buttons on each side of the HP UltraFlow airflow guide and lift it out of the PC Workstation's case. 5 Unscrew the four self-retaining screws at the back of the power supply. Unscrew the self-retaining screws English 31
English
31
2
How to Install Accessories In Your Minitower PC Workstation
Moving the Power Supply
Moving the Power Supply
You can slide the power supply unit out of the computer to improve
access to the system board and the cables at the rear of the disk drives.
1
Disconnect the computer’s power cord and any LAN cable.
2
Remove the computer’s cover (see page 27).
3
Remove the fan connection to the system board.
4
Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation’s case.
5
Unscrew the four self-retaining screws at the back of the power
supply.
HP UltraFlow
Airflow Guide
Retaining button
Fan connection to
system board
Unscrew the
self-retaining screws