HP Kayak XA 05xx HP Kayak XA Series 05xx, Upgrade & Configuration Guide - Page 63

POST Phase

Get HP Kayak XA 05xx PDF manuals and user guides View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

POST Phase 3 Troubleshooting Your HP Kayak PC Workstation Using HP MaxiLife to Diagnose Problems Following these checks, the POST (Power-On Self Test) sequence is initiated. One of the following screens will appear in this phase: HP KAYAK XA No errors occurred. Error! POST XXXX A POST error occurred. Refer to "If a POST Error Message is Displayed" on page 60 for more information. Other Features HP MaxiLife can also be configured to: • Display the configuration details of your PC Workstation required to obtain support (System info). • Indicate POST (Power-On Self Test) steps during the power-on phase (Boot steps). • Perform diagnostic tests on your PC Workstation's various hardware components and display the results (Diags). To configure your HP LCD: 1 Ensure that your PC Workstation's power cord is connected to a grounded outlet. In this state, your PC Workstation's hardware management chip is active, even if your system is not powered on. 2 Press one of the LCD control buttons. The following menu is displayed. System info Boot steps Next Go Diags Exit Next Go 3 Use to scroll down through the menu items and to select the required menu item. English 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
English
53
3
Troubleshooting Your HP Kayak PC Workstation
Using HP MaxiLife to Diagnose Problems
POST Phase
Following these checks, the POST (Power-On Self Test) sequence is
initiated. One of the following screens will appear in this phase:
Other Features
HP MaxiLife can also be configured to:
•
Display the configuration details of your PC Workstation required to
obtain support
(System info).
•
Indicate POST (Power-On Self Test) steps during the power-on
phase
(Boot steps).
•
Perform diagnostic tests on your PC Workstation’s various hardware
components and display the results
(Diags)
.
To configure your HP LCD:
1
Ensure that your PC Workstation’s power cord is connected to a
grounded outlet.
In this state, your PC Workstation’s hardware management chip is
active, even if your system is not powered on.
2
Press one of the LCD control buttons. The following menu is
displayed.
3
Use
to scroll down through the menu items and
to select the
required menu item.
HP KAYAK XA
No errors occurred.
A POST error occurred. Refer to “If a POST
Error Message is Displayed” on page 60 for
more information.
Error!
POST XXXX
System info
Boot steps
Next
Go
Diags
Exit
Next
Go