HP Kayak XA 05xx HP Kayak XA Series 05xx, Upgrade & Configuration Guide - Page 50
Installing a Hard Disk Drive in a Front-Access Shelf
View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
2 How to Install Accessories In Your Minitower PC Workstation Installing Mass Storage Devices Installing a Hard Disk Drive in a Front-Access Shelf 1 Disconnect the computer's power cord and any LAN or telecommunications cable. 2 Remove the computer's cover (see page 27). 3 Remove the fan connection to the system board (see the illustration on page 31). 4 Press the retaining buttons on each side of the HP UltraFlow airflow guide and lift it out of the PC Workstation's case. 5 Slide out the power supply to provide better access to the disk drive cables (see page 31). 6 Unscrew and remove an unused drive tray. Remove the drive tray Set the drive on the tray 7 Mount the drive on the tray as shown below. Fix the drive to the tray 40 English
2
How to Install Accessories In Your Minitower PC Workstation
Installing Mass Storage Devices
40
English
Installing a Hard Disk Drive in a Front-Access Shelf
1
Disconnect the computer’s power cord and any LAN or
telecommunications cable.
2
Remove the computer’s cover (see page 27).
3
Remove the fan connection to the system board (see the illustration
on page 31).
4
Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation’s case.
5
Slide out the power supply to provide better access to the disk drive
cables (see page 31).
6
Unscrew and remove an unused drive tray.
7
Mount the drive on the tray as shown below.
Remove the
drive tray
Set the drive on
the tray
Fix the drive to
the tray