HP Kayak XA 05xx HP Kayak XA Series 05xx, Upgrade & Configuration Guide - Page 31
Installing Accessory Boards
View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
CAUTION NOTE 1 How to Install Accessories In Your Desktop PC Workstation Installing Accessory Boards Installing Accessory Boards Static electricity can damage electronic components. Turn OFF all equipment. Don't let your clothes touch the accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing the accessory from the bag. Handle the accessory as little as possible and with care. The PC Workstation has the following accessory board slots (from left to right): • Slot AT 2 for full-length 16-bit ISA boards • Slot AT 1/PCI 4 for either a 16-bit ISA board or a full-length 32-bit PCI board • Slot PCI 3 for a full-length 32-bit PCI board • Slot PCI 2 for a full-length 32-bit PCI board • Slot PCI 1 for a full-length 32-bit PCI board • Slot AGP for the video adapter board. Installing the Board PCI boards are configured automatically when installed in the PC Workstation. 1 Disconnect the computer's power cord and any LAN connection or telecommunications cable. 2 Remove the computer's cover (refer to page 3). 3 Find an empty accessory board slot. Refer to "System Board Connectors" on page 84 to identify the location of the slot type you want to use (ISA or PCI). Some boards may have preferred locations and special installation instructions detailed in their manuals. English 21