HP Kayak XA 05xx HP Kayak XA Series 05xx, Upgrade & Configuration Guide - Page 57
When an IDE CD-ROM, Drive Is Installed, When a Flexible Disk
![]() |
View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
2 How to Install Accessories In Your Minitower PC Workstation Installing Mass Storage Devices Completing the Installation of a Drive When an IDE CD-ROM 1 Switch on the computer and press F2 when F2 Setup appears. Drive Is Installed 2 In the Setup program, select the Advanced menu, then the IDE Devices submenu. Check that the CD-ROM drive has been detected on the IDE channel. 3 Press F3 to save and exit the program. When a Flexible Disk Drive Is Installed 1 Switch on the computer and press F2 when F2 Setup appears. 2 In the Setup program, select the Advanced menu, then the Flexible Disk Drives submenu, and check that the drive has been detected. 3 Press F3 to save and exit the program. English 47
![](/manual_guide/products/hewlettpackard-kayak-xa-05xx-hp-kayak-xa-series-05xx-upgrade-configuration-guide-9b13e06/57.png)
English
47
2
How to Install Accessories In Your Minitower PC Workstation
Installing Mass Storage Devices
Completing the Installation of a Drive
When an IDE CD-ROM
Drive Is Installed
1
Switch on the computer and press
F2
when
F2 Setup
appears.
2
In the
Setup
program, select the
Advanced
menu, then the
IDE Devices
submenu. Check that the CD-ROM drive has been detected on the
IDE channel.
3
Press
F3
to save and exit the program.
When a Flexible Disk
Drive Is Installed
1
Switch on the computer and press
F2
when
F2 Setup
appears.
2
In the
Setup
program, select the
Advanced
menu, then the
Flexible Disk
Drives
submenu, and check that the drive has been detected.
3
Press
F3
to save and exit the program.