HP Kayak XA 05xx HP Kayak XA Series 05xx, Upgrade & Configuration Guide - Page 32

with the socket and does not touch components on other

Get HP Kayak XA 05xx PDF manuals and user guides View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

1 How to Install Accessories In Your Desktop PC Workstation Installing Accessory Boards 4 Unscrew and remove the slot cover. Store it in a safe place. If the slot cover is tight, loosen the screws on the adjacent slots. 5 Hold the board by its "top" edge. Slide it into the board guide of the chosen slot. Do not bend the board. Slide the accessory board into position 6 Align the board's connector with the slot's socket. Firmly press the board into the socket. Ensure the board's connector engages completely with the socket and does not touch components on other boards. 7 Secure the board by replacing the screw. If you loosened the screws on adjacent slots, remember to tighten them. 8 Install any other accessories before replacing the cover (refer to page 4). 9 Reconnect all cables and power cords. 22 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
1
How to Install Accessories In Your Desktop PC Workstation
Installing Accessory Boards
22
English
4
Unscrew and remove the slot cover. Store it in a safe place.
If the slot cover is tight, loosen the screws on the adjacent slots.
5
Hold the board by its “top” edge. Slide it into the board guide of the
chosen slot. Do
not
bend the board.
6
Align the board’s connector with the slot’s socket. Firmly press the
board into the socket. Ensure the board’s connector engages
completely
with the socket and does not touch components on other
boards.
7
Secure the board by replacing the screw. If you loosened the screws
on adjacent slots, remember to tighten them.
8
Install any other accessories before replacing the cover (refer to
page 4).
9
Reconnect all cables and power cords.
Slide the accessory
board into position