HP Kayak XA 05xx HP Kayak XA Series 05xx, Upgrade & Configuration Guide - Page 60
F2 Setup, IRQ 11, Available, Reserved
![]() |
View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
2 How to Install Accessories In Your Minitower PC Workstation Installing Accessory Boards 7 Secure the board by replacing the slot cover screw. If you loosened the screws on adjacent slots, remember to tighten them. Secure the board in position 8 Install any other accessories before replacing the cover (see page 27). Reconnect all cables and power cords. Completing the Installation of an ISA Accessory Board If you have installed an ISA accessory board that uses any interrupt, you must run the Setup program and reserve the IRQ for the accessory board. 1 Turn on the PC Workstation and press F2 when F2 Setup appears. 2 In the Setup program, select the Advanced menu and the ISA Resource Exclusion submenu. A list of IRQs and the devices that use them are displayed. Highlight the IRQ field you want to change, for example IRQ 11. 3 You can use the space bar or press F7 or F8 to make the IRQ available for PCI (Available) or make it unavailable for PCI (Reserved). 4 Press F3 to save any changes you made and exit the Setup program. NOTE You should always leave at least one IRQ available for use by the integrated PCI devices. 50 English
![](/manual_guide/products/hewlettpackard-kayak-xa-05xx-hp-kayak-xa-series-05xx-upgrade-configuration-guide-9b13e06/60.png)