HP LaserJet MFP M232-M237 User Guide - Page 60
Interpret control-panel light patterns, USB model, The Status light on the printer blinks
View all HP LaserJet MFP M232-M237 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Interpret control-panel light patterns ● USB model ● Wireless model USB model The Status light on the printer blinks The printer is processing a job or is initializing, restarting, cooling, or cleaning. No action is required. NOTICE: If the Status light blinks quickly, turn off the printer and then turn it on again. If problem persists, Contact HP. The Attention light is on Attention light on, Paper light blinks. If (the Paper light) blinks, the printer might be out of paper (see Load paper) or paper might be Attention light on, Cartridge light blinks. jammed (see Clear paper jams). If you are sending a manual feed job, load paper, and press (the Resume button) to continue. If (the Cartridge light) blinks, the cartridge might be very low or there is a cartridge error (such as incompatible, unauthorized, protected). Replace the toner cartridge. NOTE: There will be no Attention state if the printer is configured to continue printing when the toner cartridge is very low. For a list of printer display codes, see Interpret printer display codes. The Attention light blinks Attention light blinks. Verify that the printer cartridge access door or the rear access is correctly closed. For a list of printer display codes, see Interpret printer display codes. The Attention light is off Attention light off, Cartridge light on. If (the Cartridge light) is on, the printer cartridge level is low. See Cartridge low. For a list of printer display codes, see Interpret printer display codes. 54 Chapter 8 Solve problems ENWW