HP LaserJet Managed MFP E82540-E82560 User Guide - Page 42
Load paper to Trays 2 and 3, Load Trays 2 and 3
![]() |
View all HP LaserJet Managed MFP E82540-E82560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Load paper to Trays 2 and 3 The following information describes how to load paper into Trays 2 and 3. ● Load Trays 2 and 3 ● Trays 2 and 3 paper orientation ● Use alternative letterhead mode CAUTION: Do not extend more than one paper tray at a time. Load Trays 2 and 3 These trays hold up to 520 sheets of 75 g/m2 paper. NOTE: The procedure to load paper to Tray 2 and Tray 3 is the same. Only Tray 2 is shown here. 1. Open the tray. NOTE: Do not open this tray while it is in use. 2. Before loading paper, adjust the paper-width guides by holding down the blue lock/unlock toggle switch on the rear paper-width guide, pinching the blue adjustment latch on the front paper-width guide, and then sliding the guides to the fully open position. 3. Adjust the paper-length guide by pushing in at the bottom of the blue adjustment latch while sliding the guide to the size of the paper being used. 30 Chapter 2 Paper trays ENWW
![](/manual_guide/products/hewlettpackard-laserjet-e80000-user-guide-ebd8701/42.png)