HP LaserJet Pro P1102 HP LaserJet Professional P1100 Series Printer - Service - Page 45
Fusing stage, Cleaning stage,
View all HP LaserJet Pro P1102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Fusing stage Step 6: The DC negative bias applied to the fusing film strengthens the holding force of the toner on the paper and prevents the toner from scattering. The product uses an on-demand fuser method. The toner image is permanently affixed to the paper by heat and pressure. Figure 1-21 Fusing Fuser heater Fuser film Toner Pressure roller Media Cleaning stage Step 7: The cleaning blade scrapes the residual toner off of the photosensitive drum and deposits it into the waste toner case. Figure 1-22 Drum cleaning Cleaning blade Photosensitive Waste toner container drum ENWW Image-formation system 27
Fusing stage
Step 6
: The DC negative bias applied to the fusing film strengthens the holding force of the toner on the
paper and prevents the toner from scattering.
The product uses an on-demand fuser method. The toner image is permanently affixed to the paper by
heat and pressure.
Figure 1-21
Fusing
Fuser film
Toner
Pressure roller
Fuser heater
Media
Cleaning stage
Step 7
: The cleaning blade scrapes the residual toner off of the photosensitive drum and deposits it into
the waste toner case.
Figure 1-22
Drum cleaning
Waste toner container
Photosensitive
drum
Cleaning blade
ENWW
Image-formation system
27