HP LaserJet Pro P1102 HP LaserJet Professional P1100 Series Printer - Service - Page 91
Caution - driver
View all HP LaserJet Pro P1102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
2. Remove four screws (callout 1), the scanner cover (callout 2) and the sheet-metal plate (callout 3). NOTE: The scanner cover and plate are removed as one assembly. TIP: When the cover is reinstalled, make sure that the black screws (callout 4) are installed in the correct screw holes. Figure 2-55 Remove the main motor (2 of 7) 4 1 2 3 3. Release two tabs (callout 1), and then slightly separate the motor driver PCA (callout 2) from the product. CAUTION: The motor driver PCA is still connected to the product by the wire harnesses and a FFC. Figure 2-56 Remove the main motor (3 of 7) 1 ENWW 2 Main assemblies 73
2.
Remove four screws (callout 1), the scanner cover (callout 2) and the sheet-metal plate (callout 3).
NOTE:
The scanner cover and plate are removed as one assembly.
TIP:
When the cover is reinstalled, make sure that the black screws (callout 4) are installed in
the correct screw holes.
Figure 2-55
Remove the main motor (2 of 7)
1
2
3
4
3.
Release two tabs (callout 1), and then slightly separate the motor driver PCA (callout 2) from the
product.
CAUTION:
The motor driver PCA is still connected to the product by the wire harnesses and a
FFC.
Figure 2-56
Remove the main motor (3 of 7)
2
1
ENWW
Main assemblies
73