HP Latex 1500 User guide - Page 313

● Clean the carriage rails manually on page 314 ● Check and clean dirt from scan axis and mechanical transmissions on page 317 ● Replace a pinchwheel submodule on page 318 ● Replace a primer and latch on page 321 ● Replace the aerosol fan module (expert users only) on page 324 ● Replace a service station cap on page 330 ● Replace an intermediate tank (trained users only) on page 334 ● Replace an e-cabinet fuse on page 337 ● Replace a spindle valve on page 340 ● Replace the pinch clamp on page 341 ● Replace the rocker pads on page 343 ● Replace the curing module side rubbers on page 290 ● Replace spindle gear and end cap on page 343 ● Replace the in-line slitter blades on page 351 Printer safety check Check the status of the alarms in the IPS. Check that the beacon works and there are no critical errors. Check the status of door and covers, make sure they are all closed before you start to print. Make sure the carriage beam is in the right position, and the loading table well closed. Table 11-43 Warning Risk of burns Crush hazard Risk of trapped fingers Hazardous moving part Electric shock hazard For more safety information, see Safety precautions on page 2 ENWW When required 305