HP ML370 ProLiant ML370 Generation 3 Server Maintenance and Service Guide - Page 26
Hot-Plug Procedures, HP ProLiant, Servers, Troubleshooting Guide
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removal and Replacement Procedures Hot-Plug Procedures You can perform hot-plug procedures without powering down the server. Before performing hot-plug procedures, observe the following guidelines: • For hot-plug fan procedures, be sure that the fan zone is fully populated. • For hot-plug power supply procedures, be sure that a redundant power supply is installed. • For hot-plug drive procedures, determine whether the drive is part of an array. For guidelines on hot-plug SCSI hard drive replacement, refer to the HP ProLiant Servers Troubleshooting Guide. HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide 2-11
Removal and Replacement Procedures
Hot-Plug Procedures
You can perform hot-plug procedures without powering down the server. Before performing
hot-plug procedures, observe the following guidelines:
•
•
•
For hot-plug fan procedures, be sure that the fan zone is fully populated.
For hot-plug power supply procedures, be sure that a redundant power supply is installed.
For hot-plug drive procedures, determine whether the drive is part of an array. For
guidelines on hot-plug SCSI hard drive replacement, refer to the
HP ProLiant
Servers
Troubleshooting Guide
.
HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide
2-11