HP ML370 ProLiant ML370 Generation 3 Server Maintenance and Service Guide - Page 61
processor retaining bracket and the three corresponding guide holes on
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Removal and Replacement Procedures To replace the processor assembly: 1. Open the processor retaining bracket 2. Install the processor/heatsink assembly into the available processor socket: a. Determine the correct processor orientation by observing the three guide pins on the processor retaining bracket and the three corresponding guide holes on the processor/heatsink assembly. Figure 2-43: Aligning the processor for installation b. Be sure the processor locking lever is open. c. Insert the processor/heatsink assembly into the processor socket (1). d. Close the processor locking lever (2). IMPORTANT: If the processor locking lever is not secured, the processor retaining bracket will not close properly. 2-46 HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide