HP ML370 ProLiant ML370 Generation 3 Server Maintenance and Service Guide - Page 47
Press down on the expansion board to seat it in the slot.
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Removal and Replacement Procedures 6. Press the PCI-X slot release lever (1) and swing the slot release lever upward (2). 7. Lift the expansion board out of the server (3). Figure 2-29: Removing a PCI-X expansion board IMPORTANT: Make note of board locations. Be sure to install replacements in the same slots. To replace a PCI-X expansion board: 1. Position the expansion board above the expansion slot and slide the board into the slot, using the PCI-X guide to align the board with the slot. 2. Press down on the expansion board to seat it in the slot. 3. Press the PCI-X slot release lever down until it clicks into place to lock the slot. 4. If the PCI-X guide clip does not snap forward to secure the board, pull it into a locked position manually. 2-32 HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide