HP ML370 ProLiant ML370 Generation 3 Server Maintenance and Service Guide - Page 30
Rack Bezel, Loosening the rack bezel thumbscrews, Removing the rack bezel
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Removal and Replacement Procedures Rack Bezel NOTE: This procedure applies to rack servers only. To remove the rack bezel: 1. Remove the access panel. Refer to "Access Panel" in this chapter. 2. Loosen the internal rack bezel thumbscrews. Figure 2-12: Loosening the rack bezel thumbscrews 3. Slide the bezel up to release the spools from the keyholes and pull it away from the server. Figure 2-13: Removing the rack bezel To replace the rack bezel, reverse steps 2 and 3. HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide 2-15
Removal and Replacement Procedures
Rack Bezel
NOTE:
This procedure applies to rack servers only.
To remove the rack bezel:
1.
Remove the access panel. Refer to “Access Panel” in this chapter.
2.
Loosen the internal rack bezel thumbscrews.
Figure 2-12: Loosening the rack bezel thumbscrews
3.
Slide the bezel up to release the spools from the keyholes and pull it away from the server.
Figure 2-13: Removing the rack bezel
To replace the rack bezel, reverse steps 2 and 3.
HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide
2-15