HP ML370 ProLiant ML370 Generation 3 Server Maintenance and Service Guide - Page 59
Processor Assembly, Lifting the processor retaining bracket lever
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Removal and Replacement Procedures Processor Assembly CAUTION: Be sure that you have the current version of the system ROM. Failure to flash your ROM with the correct version before installing or replacing the processor causes system failure. For the most current version of the ROM, go to: www.hp.com/servers/manage/ CAUTION: The processor, heatsink, and retaining clip comprise a single assembly. Separating the processor from the heatsink causes thermal instability and damage to the server. To remove a processor assembly: 1. Power down and remove power from the server. Refer to "Powering Down the Server" in this chapter. 2. Unlock and open the front bezel (tower server only). IMPORTANT: You must unlock the tower bezel before removing the access panel. Refer to "Front Bezel" in this chapter. 3. Remove the access panel. Refer to "Access Panel" in this chapter. 4. Remove the processor air baffle. Refer to "Processor Air Baffle" in this chapter. 5. Open the processor cage. 6. Lift the processor retaining bracket lever to release the processor retaining bracket. Figure 2-41: Lifting the processor retaining bracket lever 2-44 HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide