HP ML370 ProLiant ML370 Generation 3 Server Maintenance and Service Guide - Page 46
PCI-X Expansion Boards, Releasing the PCI guide clip
UPC - 613326765616
View all HP ML370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Removal and Replacement Procedures PCI-X Expansion Boards CAUTION: To avoid the risk of damage to your system or expansion boards, disconnect all AC power cords before installing or removing expansion boards. Moving the Power On/Standby button to the off position still provides auxiliary power to the PCI-X expansion slot and may damage the board or other system components. CAUTION: Do not remove an expansion slot cover unless you are installing a PCI-X expansion board. Operating the server without an expansion board or an expansion slot cover installed results in improper airflow and improper cooling, which can lead to thermal damage. To remove a PCI-X expansion board: 1. Power down and remove power from the server. Refer to "Powering Down the Server" in this chapter. 2. Unlock and open the front bezel (tower server only). 3. Remove the access panel. Refer to "Access Panel" in this chapter. 4. Disconnect any cables attached to the expansion board. 5. Release the PCI-X guide clip. NOTE: The dividers and divider base are removed from Figure 2-28 for clarity. Figure 2-28: Releasing the PCI guide clip HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide 2-31