HP OMEN Transcend 14 Maintenance and Service GuideOMEN Transcend 14 inch Gamin - Page 42
Solid-state drive, Remove the Phillips M2.0 × 3.0 screw
View all HP OMEN Transcend 14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
c. Lift the cable (3) off the display rear cover. The camera module is available as spare part number N84266-001. To install the display components with the display attached to the computer, reverse these procedures. Solid-state drive To remove the solid-state drive, use this procedure and illustration. Table 5-3 Solid-state drive descriptions and part numbers Description 2 TB, TLC 2 TB, TLC (only for use in China) 1 TB, TLC 1 TB, TLC (only for use in China) 512 GB, TLC Solid-state drive thermal pad Spare part number M52027-001 N77396-001 M16560-001 N77395-001 M17436-001 N84256-001 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 30). 2. Remove the bottom cover (see Bottom cover on page 30). 3. Disconnect the battery cable from the system board (see Battery on page 31). Remove the solid-state drive: 1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the solid-state drive cover. 2. Lift the cover (2) off the drive. 36 Chapter 5 Removal and replacement procedures for authorized service provider parts