HP OMEN Transcend 14 Maintenance and Service GuideOMEN Transcend 14 inch Gamin - Page 76
Solid-state drive specifications, This provides specifications for your solid-state drives.
View all HP OMEN Transcend 14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Table 9-2 Display specifications Active diagonal size Resolution Surface treatment Brightness Viewing angle Backlight Display panel interface Metric 35.6 cm 2880 × 1800 (2.8K) BrightView 400 nits UWVA AMOLED eDP U.S. 14.0 in Solid-state drive specifications This section provides specifications for your solid-state drives. Table 9-3 Solid-state drive specifications 512 GB* 1 TB* 2 TB* Dimensions Height 1.0 mm 1.0 mm 1.0 mm Length Width 50.8 mm 28.9 mm 50.8 mm 28.9 mm 50.8 mm 28.9 mm Weight < 10 g < 10 g < 10 g Interface type PCIe PCIe PCIe Ready time, maximum (to not busy) Access times, logical < 1.0 ms 0.1 ms < 1.0 ms 0.1 ms < 1.0 ms 0.1 ms Transfer rate Sequential read up to 2150 MBps Up to 300,000 IOPs Up to 300,000 IOPs Random read Sequential write Up to 300,000 IOPs Up to 300,000 IOPs up to 1550 MBps up to 1550 MBps Up to 300,000 IOPs up to 2500 MBps Random write Up to 100,000 IOPs Up to 100,000 IOPs Up to 125,000 IOPs Total logical sectors 1,000,215,216 1,500,336,388 2,985,523,121 Operating temperature 0°C to 70°C (32°F to 158°F) *1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications might differ slightly. NOTE: Certain restrictions and exclusions apply. Contact support for details. 70 Chapter 9 Specifications