HP P Class 450/500/550/600/650/700/750 DiagTools User's Guide - Page 58

Real Time Clock RTC error.

Page 58 highlights

Appendix A The Error Codes 0001h - 00CCh: System Error Codes Code 0077h 0078h 0079h 0080h 0081h 0082h 0083h 0084h 0085h 0086h 0087h 0088h 008Ah Explanation Details/Parts to Check Periodic time update cycle not occurring. Real Time Clock (RTC) error. Install new system board. CMOS RAM checksum error detected. CMOS RAM error. Install new system board battery. If error persists, install new system board. CMOS RAM fails to hold data. CMOS RAM error. Install new system board battery. If error persists, install new system board. This test runs on EISA systems only You attempted to run this test on a system that does not have an EISA architecture. EISA software NMI test failed Install new system board. EISA fail-safe timer test failed Install new system board. PCI System Bus scan test failed. BIOS or system board error. Install new system BIOS. If error persists, install new system board. Cannot access PCI devices through the Install new BIOS or system board. FIND_PCI_DEVICE call. Reading configuration space registers on Install new BIOS or system board. boundary conditions failed. Consistency checking of PCI configuration Install new BIOS or system board. space failed. GENERATE_SPECIAL_CYCLE check failed. Install new system board. BIOS32 service directory integrity check BIOS error. failed. Install new system BIOS. PCI stress test failed. Buffer data mismatch. Check that the SCSI controller is correctly installed. 48 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

Appendix A
The Error Codes
0001h – 00CCh:
System Error Codes
48
English
0077h
Periodic time update cycle not occurring.
Real Time Clock (RTC) error.
Install new system board.
0078h
CMOS RAM checksum error detected.
CMOS RAM error.
Install new system board battery.
If error persists, install new system board.
0079h
CMOS RAM fails to hold data.
CMOS RAM error.
Install new system board battery.
If error persists, install new system board.
0080h
This test runs on EISA systems only
You attempted to run this test on a system that does
not have an EISA architecture.
0081h
EISA software NMI test failed
Install new system board.
0082h
EISA fail-safe timer test failed
Install new system board.
0083h
PCI System Bus scan test failed.
BIOS or system board error.
Install new system BIOS.
If error persists, install new system board.
0084h
Cannot access PCI devices through the
FIND_PCI_DEVICE call.
Install new BIOS or system board.
0085h
Reading configuration space registers on
boundary conditions failed.
Install new BIOS or system board.
0086h
Consistency checking of PCI configuration
space failed.
Install new BIOS or system board.
0087h
GENERATE_SPECIAL_CYCLE check
failed.
Install new system board.
0088h
BIOS32 service directory integrity check
failed.
BIOS error.
Install new system BIOS.
008Ah
PCI stress test failed. Buffer data
mismatch.
Check that the SCSI controller is correctly installed.
Code
Explanation
Details/Parts to Check