HP P Class 450/500/550/600/650/700/750 DiagTools User's Guide - Page 89
h - 1503h, Modem Error Codes
View all HP P Class 450/500/550/600/650/700/750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Appendix A The Error Codes 1500h - 1503h: Modem Error Codes Code 1031h Explanation L2 Cache Parity error. 1081h No active external cache memory. 1082h 1083h 8000h No extended memory available from HIMEM.SYS. No extended memory detected. Fails in executing an external program. Details/Parts to Check Cache memory error. Check processor, L2 cache and main memory are correctly installed. Run memory tests to confirm correct function of main memory and any external L2 cache memory. If error persists, replace processor. Cache memory error. Enable external cache memory from BIOS setup. Unload HIMEM.SYS or programs using HIMEM.SYS. Install the extended memory to be tested. Make sure the external program is in the DiagTools directory. 1500h - 1503h: Modem Error Codes Code 1500h Explanation No modem. 1501h 1502h 1503h IRQ test failed. Loopback test failed. Dial tone failed. Details/Parts to check Modem not found. Power on the modem and re-run the diagnostic test. Check IRQ jumper settings. Install a new modem. Ensure that the line cable is plugged in. English 79