HP P Class 450/500/550/600/650/700/750 DiagTools User's Guide - Page 87
Check processor, L2 cache and main memory are
View all HP P Class 450/500/550/600/650/700/750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Appendix A The Error Codes 1000h - 100Dh: Multiple Processor Error Codes Code 100Ch 100Dh Explanation Memory map I/O access test failed on processor X at address XXXXXXXXh. Application processors were not detected. 100Eh CPU speed error. 100Fh CPU count error. 1010h Configuration access mechanism test failed. 1011h TagRAM control register read failed. 1012h TagRAM control register write failed. 1013h Value read back from TagRAM control register is not the same as the value written. Details/Parts to Check Processor error. Install a new processor. Processor error. Check that the processor is correctly configured. If the error persists, install new processor. Processor speed error. Check processor Speed stamp and clocks. If the error persists, install new processor. Processor error. Check number of processors present. Check processor, L2 cache and main memory are correctly installed. If problem persists, install new: • L2 memory (if installed in accessory slot), or • processor (if integrated on the processor card). Check processor, L2 cache and main memory are correctly installed. If problem persists, install new: • L2 memory (if installed in accessory slot), or • processor (if integrated on the processor card). Check processor, L2 cache and main memory are correctly installed. If problem persists, install new: • L2 memory (if installed in accessory slot), or • processor (if integrated on the processor card). Check processor, L2 cache and main memory are correctly installed. If problem persists, install new: • L2 memory (if installed in accessory slot), or • processor (if integrated on the processor card). English 77