HP P Class 450/500/550/600/650/700/750 DiagTools User's Guide - Page 86
h - 100Dh, Multiple Processor Error Codes
View all HP P Class 450/500/550/600/650/700/750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Appendix A The Error Codes 1000h - 100Dh: Multiple Processor Error Codes Code 0F04h Explanation Seek operation failed. 0F05h Eject fails on drive x. Details/Parts to Check If the seek function is supported by the device controller, replace the controller. The eject feature is not supported or does not work. Re-run the diagnostics test. 1000h - 100Dh: Multiple Processor Error Codes Code 1000h 1001h 1002h 1008h 1009h 100Ah 100Bh Explanation Details/Parts to Check Processors don't have unique IDs. Processor ID error. Check that the processor is correctly configured. Processor X failed to interrupt processor Processor error. Y. Install a new processor. IPI physical mode test failed on processor Processor error. X. Install a new processor. MPI arbitration test failed. Processor error. Check that the processor is correctly configured. If the error persists, install new processor. Cache coherency test failed. Processor error. Check that the processor is correctly configured. If the error persists, install new processor. Memory consistency test failed. Processor error. Check that processor is Install a new processor. I/O access test failed on processor X at Processor error. port XXXXh. Install a new processor. 76 English