HP Photosmart 720 HP Photosmart 720 series digital camera - (English) User Gui - Page 55

My image is, too bright., Flash, Flash On, When I, connect the, camera to my, computer,

Get HP Photosmart 720 PDF manuals and user guides View all HP Photosmart 720 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Problem Possible cause Solution My image is too bright. The flash provided too much light. Change the flash setting to Flash Off. A natural or artificial source other than the flash provided too much light. Try taking the picture from a different angle. Avoid pointing the camera directly toward a bright light or reflective surface on a sunny day. If there is light behind your subject, use the Flash On setting. Adjust the EV compensation. You were too close to the subject to use the flash. Move back from the subject or set the flash to Flash Off and take the picture again. When I connect the camera to my computer, the software says it cannot find the camera. The camera is turned off. The cable is not connected correctly. The camera is connected to the computer through a USB hub and your USB hub is not compatible with the camera. Turn on the camera. Make sure that the cable is firmly connected at both ends. Connect the camera directly to a USB port on the computer. 6-Troubleshooting and support 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
6-Troubleshooting and support
55
My image is
too bright.
The flash
provided too
much light.
Change the flash setting to
Flash
Off
.
A natural or
artificial
source other
than the flash
provided too
much light.
Try taking the picture from a
different angle. Avoid pointing
the camera directly toward a
bright light or reflective surface
on a sunny day. If there is light
behind your subject, use the
Flash On
setting. Adjust the EV
compensation.
You were too
close to the
subject to use
the flash.
Move back from the subject or
set the flash to
Flash Off
and
take the picture again.
When I
connect the
camera to my
computer, the
software says
it cannot find
the camera.
The camera is
turned off.
Turn on the camera.
The cable is
not connected
correctly.
Make sure that the cable is firmly
connected at both ends.
The camera is
connected to
the computer
through a USB
hub and your
USB hub is not
compatible
with the
camera.
Connect the camera directly to a
USB port on the computer.
Problem
Possible cause
Solution