Home » HP Manuals » Multifunction Devices » HP Photosmart C6300 » Manual Viewer

HP Photosmart C6300 Basic Guide - Page 27

CAUTION, until it clicks into place and is seated firmly in the slot. - ink cartridges

View all HP Photosmart C6300 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

CAUTION: Do not lift the latch handle on the print carriage to remove the ink cartridges. 4. Remove the new ink cartridge from its packaging by pulling the orange pull-tab straight back to remove the plastic wrap from the ink cartridge. NOTE: Make sure you remove the plastic wrap from the ink cartridge before installing it in the product, or printing will fail. 5. Twist the orange cap to snap it off. HP All-in-One overview 6. Using the colored shaped icons for help, slide the ink cartridge into the empty slot until it clicks into place and is seated firmly in the slot. CAUTION: Do not lift the latch handle on the print carriage to install the ink cartridges. Doing so can result in incorrectly seated ink cartridges and printing problems. The latch must remain down in order to correctly install the ink cartridges. Make sure that you insert the ink cartridge into the slot that has the same shaped icon and color as the one you are installing. Replace the ink cartridges 25

Section	Page
Contents	3
Network setup	4
Set up the HP All-in-One on a wired (Ethernet) network	4
What you need for a wired network	5
Connect the HP All-in-One to the network	5
Set up the HP All-in-One on an integrated wireless (WLAN 802.11) network	6
What you need for an integrated wireless WLAN 802.11 network	7
Connect to an integrated wireless WLAN 802.11 network	7
Set up the HP All-in-One using an ad hoc wireless connection	9
What you need for an ad hoc network	10
Create a network profile for a Windows Vista or Windows XP computer	10
Create a network profile for other operating systems	11
Connect to a wireless ad hoc network	12
Install the software for a network connection	13
Connect to additional computers on a network	14
Change the HP All-in-One from a USB connection to a network connection	14
Configure your firewall to work with HP products	15
Advanced firewall information	16
Manage your network settings	16
Print network settings	16
Restore network defaults	17
Turn the wireless radio on and off	17
Print the wireless network test	17
HP All-in-One overview	18
The HP All-in-One at a glance	18
Control panel features	19
Find more information	20
Start Here guide	20
Onscreen Help	20
HP Web site	21
Load paper	21
Avoid paper jams	23
Print a photo on photo paper	24
Scan an image	25
Make a copy	25
Replace the ink cartridges	26
Troubleshooting and support	29
Uninstall and reinstall the software	29
Setup troubleshooting	30
The product will not turn on	30
After setting up the product, it does not print	31
Network troubleshooting	32
Step 1: Make sure that the computer is connected to your network	32
Step 2: Make sure that the HP All-in-One is connected to your network	33
A: Make sure the product is on the network	33
B: Check to see if you can access the HP Photosmart C6300 All-in-One series home page	34
Step 3: Check to see if the firewall software is blocking communication	34
Step 4: Make sure the product is online and ready	34
Step 5: Make sure the HP Network Devices Support service is running	35
Clear paper jams	35
Information on ink cartridges and the printhead	36
Support process	36
Technical information	37
System requirements	37
Product specifications	37
Regulatory notices	37