HP Photosmart M23 HP Photosmart M22/23 Digital Camera with HP Instant Share - - Page 120
Auto Flash, Focus Lock
View all HP Photosmart M23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Problem My image is blurry (continued). My image is too bright. Possible Cause Solution The camera should have been set to the Macro shooting mode. Set the camera to the Macro , shooting mode and try taking the picture again (see page 42). The subject moved or you moved the camera while you took the picture. • Set the flash to Auto Flash or Flash On and set the shooting mode to Action . • Hold the camera with two hands as you press the Shutter button or use a tripod. Watch for the icon in the Image Display (this means that it is almost impossible to hold the camera steady, and you must use a tripod). The camera focused on the wrong thing, or was unable to focus. • Make sure the focus brackets turn green before taking the picture (see page 36). • Use Focus Lock (see page 38). The flash provided too much light. • Use Image Advice (see page 72). • Turn the flash off (see page 40). • Move back from the subject. You used EV Set EV Compensation to 0.0 Compensation (see page 56). when you should not have. 120 HP Photosmart M22/M23 User's Manual