HP Presario 1600 Presario Select 1600 Series Maintenance and Service Guide - Page 39
Service Considerations - compaq driver
View all HP Presario 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Maintenance & Service Guide Presario 1600 Series Portable Computers Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack Service Considerations Listed below are some of the considerations that you should keep in mind during the disassembly and assembly of the computer. Tool and Software Requirements To service the computer, you need the following: q Torx T-9 screwdriver q 3/16-inch and 7/32-inch nut drivers (for screw locks and standoffs) q Small, standard screwdriver q Small, Phillips screwdriver q Diagnostics software q Service Kit Screws The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations. IMPORTANT: As each subassembly is removed from the computer, place it away from the work area to prevent damage to the subassembly. Return to Removal & Replacement Procedures.