HP Server rp7420 HP 9000 rp7420 Server - User Service Guide, Fifth Edition - Page 39
Installing the Server Into the Rack, Lift Handles Mounted
View all HP Server rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Figure 2-11 Lift Handles Mounted 6. Continue to pull the handles apart until the spring plunger snaps into final position. The spring plunger drops down into the recess position. 7. Ensure that the handles are secure by pressing the handles together and moving back and forth. 8. For the other handle, repeat steps 3 through 7. 9. To lift the server, rotate the handles 90 degrees to horizontal position. NOTE: If installing the system in a rack, see the Installation Guide, HP J1530B Rack Installation Kit. 10. After moving the server, remove the lift handle panels from the chassis and reinstall the server covers and front bezel. Refer to the installation guide, HP J1530B rack installation kit. Installing the Server Into the Rack Any server that is to be installed into a rack is shipped with equipment slides. With every set of slides comes an installation guide: Installation Guide, HP J1530B Rack Installation Kit. Installing the Server Into the Rack 39