HP Server rp7420 HP 9000 rp7420 Server - User Service Guide, Fifth Edition - Page 97
Replacing a PCI-X Smart Fan Assembly, Removing and Replacing a Bulk Power Supply, CAUTION
View all HP Server rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
2. Grasp the fan with thumb and forefinger while depressing the locking tab. NOTE: The two right side fans, as viewed from the front, are located very close to the chassis. It might be necessary to use a tool, such as a flat blade screwdriver, to assist in removing them. 3. Slide the fan upward from the chassis. Replacing a PCI-X Smart Fan Assembly To replace a PCI-X smart fan assembly, follow these steps: 1. Carefully position the fan assembly in the chassis. The fan easily slides into the chassis. 2. To properly seat the connection, use a slow, firm pressure. 3. Replace the top cover. NOTE: A green fan LED indicates the fan is operational. Removing and Replacing a Bulk Power Supply The bulk power supply (BPS) is located in the front of the chassis. The BPS is a hot swappable component. CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety precautions can result in damage to the server. Figure 6-16 BPS Location Removing and Replacing a Bulk Power Supply 97