HP Server rp7420 HP 9000 rp7420 Server - User Service Guide, Fifth Edition - Page 71
PCI Power Supply LEDs, Table 5-3 BPS LEDs, PCI Power Supply LED Locations
View all HP Server rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Table 5-3 BPS LEDs LED Indication Blinking Green Green Blinking Yellow Yellow Blinking RED Red Off Description BPS is in standby state with no faults or warnings BPS is in run state (48 volt output enabled) with no faults or warnings BPS is in standby or run state with warning(s) present but no faults BPS is in standby state with recoverable fault(s) present but no non-recoverable faults BPS state might be unknown, non-recoverable fault(s) present Not used BPS fault or failure, no power cords installed or no power to the chassis PCI Power Supply LEDs There are three LEDs on the PCI power supply. Green and yellow LEDs follow OL* operation. A multi-color LED reports warnings and faults. Figure 5-4 PCI Power Supply LED Locations Table 5-4 PCI Power Supply LEDs LED Power Driven By Each supply State On Green Off Attention MP through PCI LPM1 Yellow Description All output voltages generated by the power supply are within limits. Power to the I/O chassis or the entire system has been removed. See Table 5-9 for LED status in combination with the green power LED for PCI-X slot status. LED Indicators 71