HP Server rp7420 HP 9000 rp7420 Server - User Service Guide, Fifth Edition - Page 65
Table 4-2 Factory-Integrated Installation Checklist
View all HP Server rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Table 4-2 Factory-Integrated Installation Checklist (continued) PROCEDURE Inspect shipping containers for damage Unpack SPU cabinet Allow proper clearance Cut polystrap bands Remove cardboard top cap Remove corrugated wrap from the pallet Remove four bolts holding down the ramps and remove the ramps Remove antistatic bag Check for damage (exterior and interior) Position ramps Roll cabinet off ramp Unpack the peripheral cabinet (if ordered) Unpack other equipment Remove and dispose of packaging material Move cabinet(s) and equipment to computer room Move cabinets into final position Position cabinets next to each other (approximately 1/2 inch) Adjust leveling feet Install anti-tip plates Inspect cables for proper installation Set up CE tool and connect to Remote RS-232 port on MP Apply power to cabinet (housekeeping) Check power to BPSs Log in to the MP Set LAN IP address on the MP Connect customer console Set up network on customer console Verify LAN connection IN-PROCESS COMPLETED Using the Checklist 65