HP Server rp7420 HP 9000 rp7420 Server - User Service Guide, Fifth Edition - Page 44
Table 3-2 Caster Part Numbers, Attaching a Caster to the Server
View all HP Server rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Table 3-2 Caster Part Numbers (continued) Caster Left front Left rear Part Number A6753-04006 A6753-04007 9. Locate and remove one of the four screws from the plastic pouch. Attach the caster to the server. Figure 3-5 Attaching a Caster to the Server 10. Attach the remaining casters to the server using the screws supplied in the plastic pouch. 11. Remove the foam blocks from the left and right side of the server. 12. Locate the plywood ramp. 13. Attach the ramp to the edge of the pallet. NOTE: There are two pre-drilled holes in the ramp. Use the two screws taped to the ramp to attach the ramp to the pallet. 14. Carefully roll the server off the pallet and down the ramp. 15. Locate the caster covers. NOTE: The caster covers are designed to fit on either side of the server. 16. Insert the slot on the caster cover into the front caster. Secure the cover to the server by tightening the captive screw on the cover at the rear of the server. 44 Installing Accessories