HP Surestore Disk Array 12h System Administrator's Guide for HP-UX, MPE, and W - Page 137
Changing Disk Array Configuration Settings, Adding a Disk, After including a disk
View all HP Surestore Disk Array 12h manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
MPE Using the ARM Command Line Utilities for MPE Adding a Disk • You can enable Auto Include, which will automatically include a disk when it is inserted into the disk array enclosure. • You can manually include each new disk. For convenience, Auto Include is enabled by default on a new disk array. For information on disabling Auto Include, see "Changing Disk Array Configuration Settings" in this chapter. After including a disk, you must decide how you want to use it. For more information, see the preceding section, "Adding a Disk." To manually include a disk, type: arraycfg -D slot -a slot is the cabinet shelf containing the disk drive (A1 through A6, or B1 through B6) 137
Using the ARM Command Line Utilities for MPE
Adding a Disk
137
MPE
•
You can enable Auto Include, which will automatically include a disk when it is inserted into the disk
array enclosure.
•
You can manually include each new disk.
For convenience, Auto Include is enabled by default on a new disk array. For information on disabling Auto
Include, see “
Changing Disk Array Configuration Settings
” in this chapter.
After including a disk, you must decide how you want to use it. For more information, see the preceding
section, “
Adding a Disk
.”
To manually include a disk, type:
arraycfg -D slot
-a <array-id
>
slot
is the cabinet shelf containing the disk drive (A1 through A6, or B1 through B6)