HP Surestore Disk Array 12h System Administrator's Guide for HP-UX, MPE, and W - Page 45

HP-UX Using the ARM Command Line Utilities for HP-UX Adding a Disk • To use the disk capacity for an Active Hot Spare, enable the Active Hot Spare feature if not currently enabled. For more information, see "Changing Disk Array Configuration Settings" in this chapter. Including a Disk A disk must be included in the disk array configuration before it can be used by the disk array. There are two ways to include a disk: • You can enable Auto Include, which will automatically include a disk when it is inserted into the disk array enclosure. • You can manually include each new disk. For convenience, Auto Include is enabled by default on a new disk array. For information on disabling Auto Include, see "Changing Disk Array Configuration Settings" in this chapter. After including a disk, you must decide how you want to use it. For more information, see the preceding section, "Adding a Disk." To manually include a disk, type: arraycfg -D slot -a slot is the cabinet shelf containing the disk drive (A1 through A6, or B1 through B6) 45