HP Surestore Disk Array 12h System Administrator's Guide for HP-UX, MPE, and W - Page 146

MPE Using the ARM Command Line Utilities for MPE Performing Disk Array Maintenance Tasks Table 18. arraylog Options for Displaying Log Contents Option -u -e -d slot -C {-c | -d slot} Description Display the contents of the disk array controller usage log. Display the contents of the disk array controller event log. Display the contents of the log for the disk installed in the cabinet slot identified by slot. Slot numbers must be of the form "An" or "Bn", where A or B correspond to a cabinet column, and n corresponds to a shelf position (1-6). Clear the specified logs. If -c is specified, clear the disk array controller usage and event logs. Both logs will be cleared when using this option. It is not possible to clear just one of the logs. If -d is specified, clear the log for the disk installed in the cabinet slot identified by slot. To display the contents of a hardware log, type: arraylog [-u] [-e] [ -d slot ] To clear the hardware logs, type: arraylog [-C{-c|-d slot}] Formatting the Disk Array Should it become necessary to do so, you can format the entire disk array, or a single LUN. Formatting destroys all data on the array or LUN involved. Formatting an array first requires that all LUNs be deleted. To format the entire disk array, type: arrayfmt -F [-h] To format a LUN, type: arrayfmt -L LUN 146