HP Surestore Disk Array 12h System Administrator's Guide for HP-UX, MPE, and W - Page 167

Using the ARDIAG Offline Diagnostic on MPE ARDIAG Operational Commands MPE ARDIAG Operational Commands Table 23 lists the ARDIAG operational commands and their descriptions. Table 23. ARDIAG Operational Commands Command Description CLRLOG Allows the user to clear the specified target's internal logs. CREATELUN Allows the user to create a LUN via the specified controller path to the disk array. DELETELUN Allows the user to delete a LUN via the specified controller path to the disk array. DESCRIBE Displays LUN configurations and warning states. DOWNLOAD Allows the user to download firmware to the specified controller or internal disk. FORMAT Allows the user to format the specified target. INQUIRY Issues an Inquiry to an array controller or an internal disk. READLOG Allows the user to read the specified target's internal logs. RECOVER Allows the user to restore controller map information in the specified SureStore E (AutoRAID) Disk Array. REQSENSE Issues a Request Sense on the specified target. RESTART Allows the user to bring the array out of the Shutdown state via the specified controller path. REVISION Displays controller, drives and software revisions. ROMT Read/Verify test to the specified internal mechanism.. SETOPTIONS Allows the user to view and set specific options for the array controller. SHUTDOWN Allows the user to put the array into a Shutdown state via the specified controller path . WRTMT Destructive write/read and verify test to the specified internal mechanism. 167