HP Surestore Disk Array 12h System Administrator's Guide for HP-UX, MPE, and W - Page 206

Using the ARDIAG Offline Diagnostic on MPE ARDIAG interface to ODE ARDIAG Utility Help Menu UTILINFO - Shows commands that do the most common ARDIAG tasks. HELP - This menu, or use HELP for more detailed help DISPMAP - Display the disk arrays found DISPMECH - Display the selected disk array and internal disks DISPFILES - Display the firmware images found DOWNLOAD - Download the image file to the desired disk array controller or internal disk. TESTDISK - Select the array to be tested. TESTLEVEL - Select the FRU within the disk array to be tested. RANGE - Select range of blocks to be tested by ROMT and WRTMT SHOWENV - Display the current settings for TESTDISK and RANGE. READLOG - Read the internal logs of the desired disk array controller or internal disk. CLRLOG - Clear the internal logs of the desired disk array controller or internal disk. REQSENSE - View SCSI Sense data of the desired disk array controller or internal disk. INQUIRY - View SCSI Inquiry data of the desired disk array controller or internal disk. DESCRIBE - View Configuration data of the desired disk array. REVISION - View revision information of the desired disk array. WRTMT - Perform a DESTRUCTIVE write/read test on the desired disk ROMT - Perform a read only test on the desired disk. CREATELUN - Adds a LUN to the selected disk array. DELETELUN - Removes a LUN from the selected disk array. SHUTDOWN - Puts the selected disk array into the shutdown state. SETOPTIONS - View and modify SCSI mode parameters on the selected array controller. RECOVER - Reconstruct data mapping and array configuration. Continue ([y]/n)? n MPE 206