HP Surestore Disk Array 12h System Administrator's Guide for HP-UX, MPE, and W - Page 262
Copying Firmware From the Primary Controller to the Secondary Controller
![]() |
View all HP Surestore Disk Array 12h manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
Using the ARM Command Line Utilities for Windows NT Downloading Firmware Copying Firmware From the Primary Controller to the Secondary Controller For proper disk array operation, the disk array controllers must have matching firmware. If the firmware revisions do not match, this procedure can be used to synchronize them. Firmware can also be copied from the primary to the secondary controller using the disk array control panel. CAUTION! The firmware code is copied from the primary controller to the secondary controller, so before performing this task make sure the controller that has the desirable code is designated the primary controller. See "Switching Array Controllers" for instructions on changing the state of the controller. To copy the firmware code from the primary controller to the secondary controller 1. Gather the following information: • The ID of the disk array. The disk array ID can be displayed using the arraydsp -i command. 2. From a command prompt type in the following command: download -M 262 Windows NT
![](/manual_guide/products/hewlettpackard-surestore-disk-array-12h-administrators-guide-hpux-mpe-windows-nt-2be7e4f/262.png)