HP Surestore Disk Array 12h System Administrator's Guide for HP-UX, MPE, and W - Page 38
Using the ARM Command Line Utilities for HP-UX, Configuring a New Disk Array
![]() |
View all HP Surestore Disk Array 12h manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
HP-UX Using the ARM Command Line Utilities for HP-UX Configuring a New Disk Array 4. Check the available unallocated capacity on the disk array by typing: arraydsp $ID The total unallocated capacity available for creating LUNs will be displayed. Make sure there is adequate capacity to create the LUN structure you need. 5. Create each LUN on the disk array by typing: arraycfg -L LUN -a capacity Example: arraycfg -L 0 -a 1000 00786B5C0000 This command creates LUN 0 with a capacity of 1000 Mbytes on the array identified by serial number 00786B5C0000. This step makes disk array capacity available to your operating system, and it must be repeated for each LUN to be created. Make sure you observe any operating system limitations on LUN size or number. For more information, see "Creating a LUN" in this chapter. 38
![](/manual_guide/products/hewlettpackard-surestore-disk-array-12h-administrators-guide-hpux-mpe-windows-nt-2be7e4f/38.png)