HP VS80 DLT VS80 Tape Drive User's Guide - Page 18

hp surestore DLT1e http://www.hp.com/support/tape may have a later version hp learning products data protection index of topics contact hp home page before you start operation cartridge care cleaning specifications DLT VS80i DLT VS80e DLT VS80m media compatibility diagnostics troubleshooting FAQs SCSI configuration UNIX configuration ordering supplies installing drivers hp surestore DLT VS80e contents of this section features specifications physical specification power requirements performance operating limits non-operating limits safety and electromagnetic compatibility features The HP Surestore DLT VS80 tape drive provides affordable 80GB backup to IT managers with mid-range servers. The 6MB/s compressed transfer rate provides backup in under 4 hours. DLT technology appeals to customers looking for reliable and scalable backup. Your new tape drive provides the following key features: q Proven DLT technology q Up to 80GB (compressed) on a single tape cartridge q Transfer rate of 6MB/s (compressed) q Read compatible with DLT4000 data q Technology scalable to higher capacities and transfer rates q Compatibility with all key backup software applications q TapeSense System™ to improve reliability by rejecting damaged media q Roller design to minimize lateral tape movement q TapeAlert support for worry-free backup q HP Library & Tape Tools software to verify successful installation and troubleshoot problems q HP Instant Support for web-based problem identification, diagnosis and resolution providing fast, easy-to-use online solutions to problems. q Ultra wide SCSI-2 interface q 3-year, next-day, unit exchange specifications physical specification dimensions 212.1 mm (8.35") W 66.2 mm (2.61") H 272.5 mm (10.73") D weight 3.5 kg (7.72 lbs) power requirements power 100-254 VAC 50/60 Hz 0.9A Auto-ranging. Power connection IEC CEE-22 performance interface Ultra wide SCSI-2 recording format DLT1 media DLTtape IV capacity 40 GB (native) transfer rate native 3 MB/sec compressed 6 MB/sec (assumes 2:1 compression) burst transfer rate 20 MB/sec (Ultra wide SCSI-2) file access time (from BOT) 68 sec typical 135 sec maximum load to BOT 59sec (slightly longer for blank tapes) unload from BOT 17 sec rewind time 68 sec typical 135 sec maximum rewind tape speed 4.1 m/sec (160 in/sec) operating limits temperature 10°C to 40°C (50°F to 104°F) humidity 20% to 80% RH (non-condensing) 10%/hr maximum operating humidity rise maximum wet bulb temperature 25°C temperature gradient 11°C per hour (across range) operating altitude -0.15 to 9 km (-500 to 30,000 ft) vibration 0.25g 5-500 Hz shock survival 10g 10ms (half sine) non-operating limits (storage ranges) temperature -40°C to 66°C (-40°F to 151°F) humidity 10% to 95% RH (non-condensing) temperature rise 20°C per hour with 5 degree margin (across range) humidity rise 10%/hr non-operating altitude N/A vibration 1g 10-500 Hz shock survival 40G 10ms (square wave) 140G 2ms (half sine) safety and electromagnetic compatibility UL 1950, 3rd edition Information Technology Equipment (ITE) CSA-C22.2 No. 950-95 Safety of Information Technology Equipment FCC Rules and Regulations, Part 15--Radio Frequency Devices, Subpart B--Unintentional Radiators, Class B Industry Canada (ICES), Radio Interference Regulation, Digital Apparatus, Class B C-TICK, AS/NZS A53548, Radio Frequency Devices Class B CISPR Publication 22 (1985), Class B EN55022: 1998, CISPR Publication 22 (1997), CISPR Publication 22 (1993) (U.S.A.), Radiated and Conducted Emissions EN61000-3-2: 1995, +Amendment A1: 1998, +Amendment A2: 1998, IEC 61000-3-2: 1995, +/A1: 1997, +/A2: 1998, Harmonic Current Emissions EN61000-3-3: 1995, IEC61000-3-3: 1994, Voltage Fluctuation and Flicker EN55024: 1998, CISPR Publication 24 (1997), IEC61000-4-2: 1995, IEC61000-4-3: 1995, IEC61000-4-5: 1995, IEC61000-4-6: 1996, IEC61000-4-8: 1993, IEC61000-4-11: 1994, Immunities CE-Mark comprised of the following requirements: EN60950/A11: 1997, IEC60950/A4: 1996, Safety of Information Technology Equipment including Electrical Business Equipment EN55082-1/IEC1000-4-2, 1000-4-3, 1000-4-4, Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment: Part 2 - Electrostatic Discharge (ESD) Requirements Part 3 - Radiated Electromagnetic Field Requirements Part 4 - Electrical Fast Transient/Burst (EFT) Requirements © 2001, Hewlett-Packard Company file:///C|/Documents%20and%20Settings/topher.COL-SPRINGS/Desktop/dltvs80%20manual/document/dltvs80/user/reseller/eng/dltvs80e.htm [11/29/2001 8:34:01 AM]