HP VS80 DLT VS80 Tape Drive User's Guide - Page 50

unix sco requently asked questions http://www.hp.com/support/tape may have a later version hp learning products data protection drivers FAQs windows NT netware unix - SCO unix - linux frequently asked questions "How do I know what disk drivers I am using at the moment, and what drivers do I need for running tape backups?" contents of this section related topics the host bus adaptor chipset the symbios logic host adaptor back to list of questions next question This topic is available in English only the host bus adapter chipset First, you need to determine which adaptor your tape is going to be installed upon. Secondly, determine which adaptor your disks are installed upon. If you are running a SCSI system and wish to install SCO, you have to have the root disk on SCSI ID 0. The host bus adaptor chipset determines which drivers are used to talk to SCSI peripherals, as shown in the following table: Adaptec Adaptec Symbios 78xx chipset 77xx chipset 53cxx chipset alad driver arad driver slha driver the symbios logic host adaptor Note that in order to install onto a Symbios adaptor you will need to install the symha driver package. This is referred to in this document as the slha (Symbios Logic Host Adaptor) driver. next question Go to the next question "How do I configure a tape drive?" © 1999-2001, Hewlett-Packard Company file:///C|/Documents%20and%20Settings/topher.COL-SPRINGS/Desktop/dltvs80%20manual/document/common/drivers_faqs/eng/us_q1.htm [11/29/2001 8:35:04 AM]