HP Visualize b1000 hp Visualize b1000, c3000, c3600 workstations parts replace - Page 15

Parts Removal and Replacement Left Side Panel Replacing the Left Side Panel 1. Replace the left side panel by holding it at an angle and inserting its top and bottom hinge hooks with their respective slots in the chassis. Swing the back edge of the panel toward the back of the workstation and press the panel firmly into place. Figure 2-6. Opened Side Panel Side-Panel Thumbscrew Hinge Slots 1 Side-Panel Hook Safety Interlock Switch Safety Interlock Pin 2 2. Replace the two T-15 Torx thumbscrews that secure the left side panel to the chassis. 3. For each of the two SCSI connectors on the rear wall of the chassis, replace either the external SCSI devices (if you had any such devices attached previously) or the appropriate terminator (if you didn't have any external devices attached). One or the other must be in place. Chapter 2 15