HP Xw8200 LSI SCSI: Integrated RAID User's Guide (PCI plug-in and system board - Page 54

Boot Adapter List Screen, Insert, Enter, Delete

Get HP Xw8200 - Workstation - 1 GB RAM PDF manuals and user guides
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Figure 5.7 Boot Adapter List Screen LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IS-X.XX.XX Boot Adapter List Insert=Add an adapter Adapter PCI Bus LSI1030 0 Dev/ Func 48 Delete=Remove an adapter Boot Order Current Status [0] On Next Boot [On] Hit Insert to select an adapter from this list LSI1030 0 50 Esc=Abort/Exit Arrow Keys=Select Item Home/End=Select Item -/+ = Change [Item] Enter=Execute The Boot Adapter List screen shows up to four boot adapters in the top list. Adapters in the bottom list can be added to the boot adapter list as long as there are currently less than four boot adapters. The SCSI BIOS saves information on the adapters shown in the top list into non-volatile memory. On the next boot, this information is used to determine which disk or IS volume to boot. The cursor starts on the top adapter in the top list. Follow these steps to add an adapter to the top list: 1. Press the Insert key to move the cursor to the bottom adapter list. 2. Use the up and down arrows to select the desired adapter. 3. When the cursor is highlighting an adapter that is connected to a disk you want to use for the IS boot volume, press Enter. To remove an adapter from the top list, use the up and down arrows to select the adapter. Then press the Delete key. Press the Esc key to exit this screen. 5-10 Setting Up Integrated Striping Version 1.0 Copyright © 2003 by LSI Logic Corporation. All rights reserved.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
5-10
Setting Up Integrated Striping
Version 1.0
Copyright © 2003 by LSI Logic Corporation. All rights reserved.
Figure 5.7
Boot Adapter List Screen
The Boot Adapter List screen shows up to four boot adapters in the top
list. Adapters in the bottom list can be added to the boot adapter list as
long as there are currently less than four boot adapters. The SCSI BIOS
saves information on the adapters shown in the top list into non-volatile
memory. On the next boot, this information is used to determine which
disk or IS volume to boot.
The cursor starts on the top adapter in the top list. Follow these steps to
add an adapter to the top list:
1.
Press the
Insert
key to move the cursor to the bottom adapter list.
2.
Use the up and down arrows to select the desired adapter.
3.
When the cursor is highlighting an adapter that is connected to a disk
you want to use for the IS boot volume, press
Enter
.
To remove an adapter from the top list, use the up and down arrows
to select the adapter. Then press the
Delete
key. Press the
Esc
key
to exit this screen.
LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IS-X.XX.XX
Boot Adapter List
Insert=Add an adapter
Delete=Remove an adapter
Adapter
PCI
Bus
Dev/
Func
Boot
Order
Current
Status
Next
Boot
LSI1030
0
48
[0]
On
[On]
Hit Insert to select an adapter from this list
LSI1030
0
50
Esc=Abort/Exit
Arrow Keys=Select Item
-/+ = Change [Item]
Home/End=Select Item
Enter=Execute <Item>