HP Z210 HP Z210 Workstation Series User Guide - Page 61

Installing optical disk drives, Installing an optical drive in an HP Z210 CMT Workstation - minitower

Get HP Z210 PDF manuals and user guides View all HP Z210 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

10 Installing optical disk drives This section describes how to install an optical disk drive (ODD) in the workstation. Installing an optical drive in an HP Z210 CMT Workstation This section describes how to install an optical disk drive in the HP Z210 CMT Workstation in the minitower and desktop configurations. Installing an optical drive (mini-tower configuration) 1. Follow the procedures described in Preparing for component installation on page 34 to prepare the workstation for component installation. 2. If necessary, remove the EMI filler from the front of the optical bay. 3. Install four black metric M3 guide screws into the drive. Spare metric M3 screws are stored on the side of the drive bays. Figure 10-1 Installing the guide screws ENWW Installing an optical drive in an HP Z210 CMT Workstation 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
10
Installing optical disk drives
This section describes how to install an optical disk drive (ODD) in the workstation.
Installing an optical drive in an HP Z210 CMT
Workstation
This section describes how to install an optical disk drive in the HP Z210 CMT Workstation in the mini-
tower and desktop configurations.
Installing an optical drive (mini-tower configuration)
1.
Follow the procedures described in
Preparing for component installation
on page
34
to prepare
the workstation for component installation.
2.
If necessary, remove the EMI filler from the front of the optical bay.
3.
Install four black metric M3 guide screws into the drive. Spare metric M3 screws are stored on the
side of the drive bays.
Figure 10-1
Installing the guide screws
ENWW
Installing an optical drive in an HP Z210 CMT Workstation
53